ViUSB-100

USB

ViUSB-100

ViUSB - 101

ViUSB-102

ETHERNET BASED PRINTER INTERFACE

USB BASED CONNECTIVITY DEVELOPMENT MODULE (ViUSB-100)

A compact board has been specially designed to offer 8 nos of Parallel & Serial ports, which a designer can connect to his circuitry. User callable software library provided that transfers data to and from the hardware port over to USB-Additional onboard 8051 and a dsPIC embedded controller provided to get maximum speed from the Serial and parallel ports like SPI, CAN controller provided to get maximum speed from the serial and parallel ports like SPI, CAN & LIN.

Incorporating a USB peripheral requires in depth knowledge of the USB protocol, USB software driver development effort and rigorous testing. Now there is an alternative.

Various choice of Serial ports and Parallel ports (I²C, SPI, RS232, CAN, LIN, FIFO) are available with ViUSB - 100 board. Simply choose the port and connect your product to ViUSB-100, then call the library functions to communicate with your product over the USB port.

Specifications

	An easy to quickly add a high speed USB 2.0 to 2x RS232 / SPI/ I²C / CAN / LIN / 8 or 16 bit High speed port.
	Supports USB 2.0 complaint, implementation through Cypress CY7C64713.
	Acts as Slave
	One high speed 8051 and a dsPIC embedded controller provided to provides 2 USARTS, CAN, LIN, SPI and I²C.

	2 USART ports are terminated at 9 pn ‘D’ type male connector
	Two high Speed SPI bus.
	Two I²C bus
	One CAN Bus terminated at ‘9' pin D connector.
	One LIN Bus.
	One Parallel port configured as Printer Port.
	Windows based driver software.
	Windows version DLL provided, can be called by practically any programming language.

Block Diagram