• PROGRAMMABLE LOGIC CONTROLLER
  • MECHANICAL
  • MECHATRONICS
  • Hyduralic and Pneumatics Lab
  • Robotics and Auto Electronics Lab
  • Mechatronics System Design Lab
  • Mechatronics Lab
  • PHYSICS
  • SPECIAL PRODUCTS
Copyright@2005 www.vimicrosystems.com All rights reserved
Realtime Application Trainers
We are offering various Real time Application modules to study the measurement & control applications. Such as lift control, level, flow, temp, speed control, process control Using PLC.

Sensors, Actuators, signal conditioners, Power supply are provided in the Application modules so that any application trainer can be easily interfaced with PLC through patch chords .



BASIC REAL TIME APPLICATIONS TRAINER [VPAT - 01]

 
  • 2 Annunciators provided for output indication.
  • One 2Kg stepper motor.
  • One 12V miniature DC motor with optical encoder for feed back.
  • One limit switch to simulate the PLC input.
  • One Buzzer to simulate the PLC output
  • Traffic light Demonstration is provided 
  • One Solid state relay.
  • One Proximity switch for metal detection.

DC MOTOR SPEED CONTROL TRAINER [VPAT - 02]

 
  • 12V PMDC motor, 
  • PWM based driver, DC motor in PID 
  • Speed indicator,
  • Optical Encoder with F/V converter

TRAFFIC LIGHT CONTROL TRANIER [VPAT - 03]

 
  • Traffic Light System represented with different color LED’s.
  • Built in Power supply.
 
PLC RTA - BATCH PROCESS REACTOR TRAINER [VPAT - 05]
BOTTLE FILLING TRAINER [VPAT - 04]
 
  • A stepper motor controlled Rotary mechanism,
  • Suitable power supply,
  • Solenoid valve to fill the Bottle, 
  • Process tank,
  • One proximity sensor and a
          optical sensor. 
  • One Reservoir tank with
          FHP pump to feed the
          water to Process tank
  • Two magnetic switches
          to maintain the two fixed
          level of water in Process
          tank .

  • A stepper motor controlled Rotary mechanism,
  • Conveyor Mechanism with timer pulley arrangement.
  • Suitable power supply, 
  • solenoid valves to fill the Process Tank and the vessel,
  • Process tank with Stirrer and Heater.
  • One proximity sensor to detect the
          vessel.
  • One Reservoir tank with
          two FHP
          pumps to feed the water
          to two Process tanks
  • Magnetic switches to
          maintain the two
          fixed level of water in
          Process tanks..

PLC RTA - MATERIAL HANDLING TRAINER [VPAT - 07]
 
PLC RTA - LEVEL CONTROL TRAINER [VPAT - 06]
 
  • A Process Tank
  • Two magnetic switches to maintain the two fixed level of water in Process tank .
  • A Reservoir Tank fitted with pump To feed the water to Process tank.
  • A Solenoid Valve fitted at the outlet of Process Tank.
  • Built in power supply with relay driving mechanism

  • One 7Kg stepper motor for arm movement.
  • One stepper motor (7Kg) for conveyor control.
  • Conveyor Mechanism with timer pulley arrangement.
  • One proximity sensor to detect the presence of material.
  • Two limit switches to control Arm movement
  • A Electromagnet in the arm to pick up the metal object.

PLC RTA - PNEUMATIC BATTERY TESTING TRAINER  [VPAT - 09]
 
PLC RTA - PNEUMATIC STAMPING TRAINER  [VPAT - 08]
 
  • Two inductive/capacitive sensors to sense the object presence.
  • A double acting pneumatic cylinder fixed horizontally in the loading unit to push the job from the loading unit to the stamping table.
  • A sliding conveyor with roller arrangement to slide the job to be stamped.
  • A mechanical support to hold the job for stamping/stamping.
  • A double acting cylinder fixed on a Stamping Holder to stamp the job
  • One pneumatic cylinder fixed horizontally to push the
          finished jobs from the stamping unit to the conveyor
  • A sliding conveyor with roller
          arrangement to slide the
          finished jobs to the storage bin.
  • Built-in power supply.

  • A transparent battery reservoir compartment of capacity 10 Nos.
  • A double acting cylinder fixed horizontally to push the battery & load the battery to the testing station..
  • A pneumatic arm plunger to pick up the battery to the testing station
  • Magnetic reed switches to sense the position of arm.
  • One Inductive/ capacitive sensors to check the battery as a conductive/non conductive material at testing station.
  • Two separate battery holder of capacity 5 nos to store the tested batteries
  • Two pair of test electrodes provided to check the holded battery voltage.
  • Built-in power supply.

PLC RTA - TEMPERATURE CONTROLLER TRAINER  [VPAT - 11]
 
PLC RTA - AC MOTOR SPEED CONTROL TRAINER  [VPAT - 10]
 
  • One 230V AC Motor of 2000 RPM.
  • One Optical encoder to sense the speed of the motor
  • Thyristor based power driver to drive the AC Motor
  • Speed indicator

  • A Process tank with heater 
  • One AD-590 temperature sensor with the signal conditioner (Output: 0-10Volt.)
  • Thyristor based power driver to provide 0-230 Volt pulsating DC to the heater coil.
  • Input: 0-10Volt,
  • Output: 0-220Volt
  • One Temperature indicator to display the temperature of water bath.

PLC RTA - RELAY TESTING TRAINER  [VPAT - 13]
 
PLC RTA - HYDRAULIC LINEAR ACTUATION TRAINER [VPAT - 12]
 
  • A Reservoir tank with oil of 25 Lts-35 Lts with level indicator.
  • One AC motor with Hydraulic gear pump,to pump the oil with high pressure.
  • One manifold valve with DC solenoid valve for directional control.
  • A hydraulic cylinder with two ports.
  • A DC solenoid valve for manual operations
  • One check valve for non-returning of oil 
  • One Relief valve for releasing extra oil pressure
  • 2 flow control valves.

  • 4 nos of power relays provided.
  • Coil supply : 24VDC.
  • Contacts rating : 230AC/6Amps.
  • LEDs to indicate the ON/OFF status.

PLC RTA - DIRECT - ON - LINE STARTER TRAINER  [VPAT - 14]
PLC RTA - STAR - DELTA STATER TRAINER [VPAT - 15]
 
 
  • Voltage transformers with Ground isolation 
  • A current Transformer of 5 Amps to sense the load current.
  • One 0.5HP AC Induction Motor for loading

  • Voltage transformers with Ground isolation 
  • A current Transformer of 5 Amps to sense the load current.
  • One 0.5HP AC Induction Motor for loading.
  • 3Nos. of Relay to actuate the 3 phase motor individually

PLC RTA - LIFT CONTROL TRAINER  [VPAT - 20]
 
PLC RTA - CAR PARKING MONITOR TRAINER  [VPAT - 16]
 
  • 3 color LEDs to indicate the status of parking slots.
  • 6 sensors provided to sense the presence of car
  • One stepper motor driver mechanism to actuate the Toll gate of parking area

  • A lead screw mechanism.
  • A 7Kg stepper motor gear mechanism 
  • A MOSFET based stepper motor driver.
  • Demand Req. switch for 3 floors
  • 3 LED outputs to indicate the status of the lift.

CONVEYOR CONTROL SYSTEM [VPAT-24]
 
  • One stepper motor (7Kg) is used for convey control
  • One proximity sensor is used to detect the Presence of material.
  • One timer belt is used for convey movement